A 1955-1959 Chevrolet/GMC Truck w/6x5.5 Lug Pattern on its original drums stops the way it did when it was new, which is to say not great by today's standards. This Right Stuff kit converts the Chevrolet/GMC Truck w/6x5.5 Lug Pattern to power front disc brakes. Why It's Worth It: Includes Flex Hoses. Timken Bearings. Built for applications listed as w/6x5.5 Lug Pattern. Application-specific for the 1955-1959 Chevrolet/GMC Truck w/6x5.5 Lug Pattern. Before You Order: Built for a 6x5.5 bolt pattern; confirm yours before ordering. The new spindles included in this kit will push the wheels outwards by 3/8 inch more than stock. Pre-bent TRS brake line kits are available separately to finish the conversion. Bleed the system and bed in the pads after installation.
Specifications:
| Booster Diaphragm Type: |
Single |
| Booster Finish: |
Original |
| Booster Housing Diameter: |
9 IN |
| Brake Activation: |
Power |
| Brake Booster Included: |
Yes |
| Caliper Piston Quantity: |
1 IN |
| Fits Wheel Size: |
15"+ IN |
| Front Rotor Diameter: |
11 IN |
| Master Cylinder Bore Size: |
1.125 IN |
| Master Cylinder Included: |
Yes |
| Master Cylinder Port Quantity: |
2 |
| Pads Included: |
Yes |
| Part Type: |
Front Disc Brake Conversion Kit |
| Rotor Type: |
Standard |
| Series: |
Street |
| Spindles Included: |
No |
| Vehicle Ride Height: |
Stock Height |
| Disclaimer: |
The new spindles included in this kit will push the wheels outwards by 3/8 inch more than stock |
| Bolt Pattern: |
6x5.5 |