The Right Stuff 59-64 Impala/Biscayne Power Front Disc Conversion Rear Drum Pre-Bent Brake Lines - (BOP59H2)

A pre-bent OE steel brake line kit for 1959-64 Impala and Biscayne builds that have gone to power front discs while keeping the rear drums. The lines come shaped to follow the factory routing. That saves you an afternoon with a tubing bender and gives a clean, original look under the car. It's the natural companion to a front disc conversion on an X-frame full-size Chevy.

Why It's Worth It

• Pre-bent to shape, so there's no measuring, bending or re-flaring on the car.
• OE steel material matches the factory appearance for correct-looking restorations.
• Laid out for a power front disc / rear drum system, including the lines needed for the conversion.

Before You Order

• This kit is for front disc / rear drum. For a 4-wheel disc car, use the matching 4-wheel disc line kit instead.
• It's meant for a power (booster) setup. Confirm your master cylinder and valve location match.
• Pre-bent lines are shipped coiled or folded. Handle them carefully and fit loosely before tightening.
• A proportioning valve suited to disc/drum is required with any front disc swap.

Specifications:

Material Option:	OE Steel
Part Type:	Brake Line Kit