Trans cooler lines on a 1963-1966 Chevrolet C10, GMC 1000/1500 w/Powerglide/Turbo 400, Automatic sit low and take every bit of road spray, so the originals are often rusted or weeping. This Right Stuff pre-bent transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so it goes in without a tubing bender.
Why It's Worth It
- CNC bent to follow the factory routing
- No cutting, bending or flaring at home
- Ends finished with OE-type fittings
- Made for the 1963-1966 Chevrolet C10, GMC 1000/1500 w/Powerglide/Turbo 400, Automatic, not cut from a universal coil
Before You Order
- Listed for w/Powerglide/Turbo 400; confirm your vehicle matches before ordering
- Check the fluid level and inspect the cooler fittings at the radiator after installation
- Compare with your original line before installing
Specifications:
| California Proposition 65: |
Yes |
| Material Option: |
OE Steel |
| Part Type: |
Automatic Transmission Oil Cooler Tube |
| Disclaimer: |
The image shows a representation of the part type. Actual part and fitment location may vary. |