Old fuel lines on a 1964 Pontiac GTO w/V8 & 4bbl rust from the inside out, and flakes of scale end up in the filter and carburetor. This Right Stuff pre-bent aluminum fuel pump to carburetor line is the short hard line from the mechanical fuel pump up to the carburetor inlet, bent to the original factory pattern so it goes in without a tubing bender. Why It's Worth It: Pre-bent to the original factory pattern. No cutting, bending or flaring at home. Ends finished with OE-type fittings. Aluminum tube, as listed. Made for the 1964 Pontiac GTO w/V8 & 4bbl, not cut from a universal coil. Before You Order: Listed for w/V8 & 4bbl; confirm your vehicle matches before ordering. Rubber fuel hose and clamps are not included; replace the short hose sections at the same time. Relieve fuel pressure, disconnect the battery and keep ignition sources away while working. Compare with your original line before installing.
Specifications:
| Material Option: |
OE Steel |
| Part Type: |
Fuel Pump To Carb Line |