Trans cooler lines on a 1973-1975 Ford F100/F150 w/C6 Trans sit low and take every bit of road spray, so the originals are often rusted or weeping. These Right Stuff pre-bent OE-style steel transmission cooler lines are the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so they go in without a tubing bender.
Why It's Worth It
- Pre-bent to the original factory pattern
- No cutting, bending or flaring at home
- Ends finished with OE-type fittings
- Steel matches the factory appearance and is easy to fine-tune by hand
- Made for the 1973-1975 Ford F100/F150 w/C6 Trans, not cut from a universal coil
Before You Order
- Listed for w/C6 Trans; confirm your vehicle matches before ordering
- Check the fluid level and inspect the cooler fittings at the radiator after installation
- Compare with your original line before installing
Specifications:
| California Proposition 65: |
Yes |
| Material Option: |
OE Steel |
| Part Type: |
Automatic Transmission Oil Cooler Tube |
| Disclaimer: |
The image shows a representation of the part type. Actual part and fitment location may vary. |