On a 1962-65 Chevy II, the original front-to-rear brake line has had sixty years to rust along the frame, and a pinhole there means a soft pedal or no rear brakes at all. This Right Stuff line is pre-bent in OE steel for the 1962-65 Chevy II, so it follows the factory route instead of making you bend it by hand.
Why It's Worth It
- Pre-bent to the factory shape for a clean, clip-in install
- OE steel for a factory-correct appearance under the car
- Covers the full 1962-65 Chevy II range
- Much faster than forming a long line by hand
Before You Order
- For 1962-65 cars. A 1966 Chevy II needs a different line
- If the car has been converted to a dual-reservoir master or front discs, confirm the front connection still matches the factory layout
- Use a proper flare-nut wrench on the old fittings and penetrating oil on anything rusted
- Bleed the whole system after installation and check every connection for seeps
Specifications:
| Material Option: |
OE Steel |
| Part Type: |
Brake Line |
| Disclaimer: |
The image shows a representation of the part type. Actual part and fitment location may vary. |