A 1960-1962 GM Truck/Suburban on its original drums stops the way it did when it was new, which is to say not great by today's standards. This Right Stuff kit converts the GM Truck/Suburban to hydro-boost front disc brakes, with hydraulic assist that runs off the power steering pump instead of engine vacuum.
Why It's Worth It
- Wilwood calipers in red
- Hydraulic assist doesn't depend on engine vacuum, so it suits big cams and low-vacuum engines
- Includes Braided Stainless Flex Hoses
- Drilled & Slotted Rotors
- Includes High Quality Brake Pads
- Timken Bearings
Before You Order
- Confirm your lug pattern and that your wheels clear the calipers before ordering
- Hydro-boost requires a power steering pump and pressure/return lines to feed the unit
- Pre-bent TRS brake line kits are available separately to finish the conversion
- Bleed the system and bed in the pads after installation
Specifications:
| UPC: |
00889165416310 |
| Bolt Pattern: |
6 X 5.5 IN |
| Booster Housing Diameter: |
8 IN |
| Brake Booster Included: |
Yes |
| Caliper Piston Quantity: |
1 |
| Master Cylinder Bore Size: |
1.125 IN |
| Pads Included: |
Yes |
| Booster Finish: |
Black |
| Series: |
Performance |
| Brake Booster / Master Cylinder Finish: |
Black |
| Wheel Lug Hole Quantity: |
6 |
| Caliper Color: |
Red |
| Booster Diaphragm Type: |
Dual |
| Front Rotor Diameter: |
11 IN |
| Brake Activation: |
Hydraulic |
| Master Cylinder Port Quantity: |
2 |
| California Proposition 65: |
Yes |
| Rotor Type: |
Drilled and slotted |
| Vehicle Ride Height: |
Stock Height |
| Fits Wheel Size: |
15"+ IN |
| Master Cylinder Included: |
Yes |
| Part Type: |
Front Disc Brake Conversions |
| Spindles Included: |
Yes |