If your 1960-1976 Mopar A-Body pulls, fades or needs a long run-up to stop, a disc conversion is the upgrade that changes how it drives. This Right Stuff kit converts the Mopar A-Body to manual 4-wheel disc brakes.
Why It's Worth It
- Includes High Quality Brake Pads
- Rear discs end drum fade and adjustment
- Application-specific for the 1960-1976 Mopar A-Body
- Application-specific kit rather than a universal setup
Before You Order
- Confirm your lug pattern and that your wheels clear the calipers before ordering
- Manual brakes rely on the correct master cylinder bore; confirm what's supplied versus reused
- The new spindles included in this kit will push the wheels outwards by 3/8 inch more than stock
- Going to 4-wheel disc changes front/rear bias, so check your proportioning valve setup
- Pre-bent TRS brake line kits are available separately to finish the conversion
- Bleed the system and bed in the pads after installation
Specifications:
| Brake Activation: |
Manual |
| Caliper Piston Quantity: |
1 |
| E-Brake Cables Included: |
Yes |
| Fits Wheel Size: |
15"+ IN |
| Front Rotor Diameter: |
11 IN |
| Master Cylinder Bore Size: |
1 IN |
| Master Cylinder Included: |
Yes |
| Master Cylinder Port Quantity: |
2 |
| Pads Included: |
Yes |
| Part Type: |
4 Wheel Disc Brake Conversion Kit |
| Rear Rotor Diameter: |
11 IN |
| Shocks: |
Non Staggered |
| Spindles Included: |
Yes |
| Vehicle Ride Height: |
Stock Height |
| Disclaimer: |
The new spindles included in this kit will push the wheels outwards by 3/8 inch more than stock |