If your 1970-1972 Monte Carlo 9" Booster pulls, fades or needs a long run-up to stop, a disc conversion is the upgrade that changes how it drives. This Right Stuff kit converts the Monte Carlo 9" Booster to power front disc brakes. Why It's Worth It: 9" booster for power assist. CNC Machined Forged Brackets. Forged Spindles. Includes Timken Bearings. Increased Brake System Performance. Before You Order: Confirm your lug pattern and that your wheels clear the calipers before ordering. Check firewall and valve cover clearance for the 9" booster. The new spindles included in this kit will push the wheels outwards by 3/8 inch more than stock. Pre-bent TRS brake line kits are available separately to finish the conversion. Bleed the system and bed in the pads after installation.
Specifications:
| Booster Diaphragm Type: |
Single |
| Booster Housing Diameter: |
9 IN |
| Brake Activation: |
Power |
| Brake Booster Included: |
Yes |
| Caliper Piston Quantity: |
1 |
| Fits Wheel Size: |
15"+ or 14" with Factory Disc Brakes IN |
| Front Rotor Diameter: |
11 IN |
| Master Cylinder Bore Size: |
1.125 IN |
| Master Cylinder Included: |
Yes |
| Master Cylinder Port Quantity: |
2 |
| Pads Included: |
Yes |
| Part Type: |
Front Disc Brake Conversion Kit |
| Series: |
Street |
| Spindles Included: |
Yes |
| Vehicle Ride Height: |
Stock Height |
| Disclaimer: |
The new spindles included in this kit will push the wheels outwards by 3/8 inch more than stock |