Drum brakes on a 1968-1969 Camaro fade on long stops and need constant adjustment. This Right Stuff kit converts the Camaro to hydro-boost 4-wheel disc brakes, with hydraulic assist that runs off the power steering pump instead of engine vacuum.
Why It's Worth It
- Hydraulic assist doesn't depend on engine vacuum, so it suits big cams and low-vacuum engines
- Includes High Quality Brake Pads
- Performance Series Conversion Kit Featuring Wilwood Calipers
- Black Powder Coated Calipers
- Drilled & Slotted Rotors
- Rear discs end drum fade and adjustment
Before You Order
- Confirm your lug pattern and that your wheels clear the calipers before ordering
- For staggered rear shock cars; confirm your rear shock layout
- Hydro-boost requires a power steering pump and pressure/return lines to feed the unit
- The new spindles included in this kit will push the wheels outwards by 3/8 inch more than stock
- Going to 4-wheel disc changes front/rear bias, so check your proportioning valve setup
- Pre-bent TRS brake line kits are available separately to finish the conversion
Specifications:
| Brake Activation: |
Hydro Boost |
| Brake Booster Included: |
Yes |
| Caliper Piston Quantity: |
2 |
| E-Brake Caliper: |
No |
| E-Brake Cables Included: |
No |
| Fits Wheel Size: |
15"+ IN |
| Front Rotor Diameter: |
11 IN |
| Master Cylinder Bore Size: |
1 IN |
| Master Cylinder Included: |
Yes |
| Master Cylinder Port Quantity: |
2 |
| Pads Included: |
Yes |
| Part Type: |
4 Wheel Disc Brake Conversion Kit w/Hydro Boost |
| Rear Rotor Diameter: |
11 IN |
| Series: |
Performance |
| Shocks: |
Staggered |
| Spindles Included: |
Yes |
| Vehicle Ride Height: |
Stock Height |
| Disclaimer: |
The new spindles included in this kit will push the wheels outwards by 3/8 inch more than stock |