Trans cooler lines on a 1976-1979 Ford F100/F150 w/C4 Trans sit low and take every bit of road spray, so the originals are often rusted or weeping. These Right Stuff pre-bent stainless steel transmission cooler lines are the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so they go in without a tubing bender.
Why It's Worth It
- Pre-bent to the original factory pattern
- No cutting, bending or flaring at home
- Ends finished with OE-type fittings
- Stainless steel holds up to moisture and road salt far longer than plain steel
- Made for the 1976-1979 Ford F100/F150 w/C4 Trans, not cut from a universal coil
Before You Order
- Listed for w/C4 Trans; confirm your vehicle matches before ordering
- Check the fluid level and inspect the cooler fittings at the radiator after installation
- Stainless is harder than mild steel, so tighten fittings carefully to seat the flares
- Compare with your original line before installing
Specifications:
| California Proposition 65: |
Yes |
| Material Option: |
Stainless Steel |
| Part Type: |
Automatic Transmission Oil Cooler Tube |
| Disclaimer: |
The image shows a representation of the part type. Actual part and fitment location may vary. |