The Right Stuff '67 - '68 396/375hp, w/ Block - Fuel Pump to Carb. Line, 4 Pcs. w/ 3/8' 8 - 5/8' Y Lines - (FPC6785)

Old fuel lines on a 1967-1968 396/375hp, w/ Block - rust from the inside out, and flakes of scale end up in the filter and carburetor. These Right Stuff pre-bent 3/8" fuel pump to carburetor lines are the short hard line from the mechanical fuel pump up to the carburetor inlet, bent to the original factory pattern so they go in without a tubing bender. Why It's Worth It: Pre-bent to the original factory pattern. No cutting, bending or flaring at home. Ends finished with OE-type fittings. 3/8" tube size, per the listing. Made for the 1967-1968 396/375hp, w/ Block -, not cut from a universal coil. Before You Order: Listed for w/ Block -; confirm your vehicle matches before ordering. Rubber fuel hose and clamps are not included; replace the short hose sections at the same time. Relieve fuel pressure, disconnect the battery and keep ignition sources away while working. Compare with your original line before installing.

Specifications:

Material Option:	OE Steel
Part Type:	Fuel Pump To Carb Line