The Right Stuff 67 - '68 396/375hp, w/ Block - Fuel Pump to Carb. Line, Stainless 4 Pcs. w/ 3/8' 8 - 5/8' Y Lines - (FPC6785S)

Old fuel lines on a 1967-1968 396/375hp, w/ Block - Fuel Pump to Carb. Line rust from the inside out, and flakes of scale end up in the filter and carburetor. These Right Stuff pre-bent 3/8" stainless steel fuel pump to carburetor lines are the short hard line from the mechanical fuel pump up to the carburetor inlet, bent to the original factory pattern so they go in without a tubing bender.

Why It's Worth It

• Pre-bent to the original factory pattern
• No cutting, bending or flaring at home
• Ends finished with OE-type fittings
• Stainless steel holds up to moisture and road salt far longer than plain steel
• 3/8" tube size, per the listing
• Made for the 1967-1968 396/375hp, w/ Block - Fuel Pump to Carb. Line, not cut from a universal coil

Before You Order

• Listed for w/ Block - Fuel Pump to Carb. Line; confirm your vehicle matches before ordering
• Rubber fuel hose and clamps are not included; replace the short hose sections at the same time
• Relieve fuel pressure, disconnect the battery and keep ignition sources away while working
• Stainless is harder than mild steel, so tighten fittings carefully to seat the flares
• Compare with your original line before installing

Specifications:

Material Option:	Stainless Steel
Part Type:	Fuel Pump To Carb Line