A 1962-1967 Chevy II, 9" Booster on its original drums stops the way it did when it was new, which is to say not great by today's standards. This Right Stuff kit converts the Chevy II, 9" Booster to power 4-wheel disc brakes. Why It's Worth It: 9" booster for power assist. Rear discs end drum fade and adjustment. Application-specific for the 1962-1967 Chevy II, 9" Booster. Application-specific kit rather than a universal setup. Before You Order: Confirm your lug pattern and that your wheels clear the calipers before ordering. Check firewall and valve cover clearance for the 9" booster. Going to 4-wheel disc changes front/rear bias, so check your proportioning valve setup. Pre-bent TRS brake line kits are available separately to finish the conversion. Bleed the system and bed in the pads after installation.
Specifications:
| Booster Diaphragm Type: |
Single |
| Booster Housing Diameter: |
9 (3 Stud) IN |
| Brake Activation: |
Power |
| Brake Booster Included: |
Yes |
| Caliper Piston Quantity: |
1 |
| E-Brake Cables Included: |
Yes |
| Fits Wheel Size: |
15"+ IN |
| Front Rotor Diameter: |
11 IN |
| Master Cylinder Bore Size: |
1 IN |
| Master Cylinder Included: |
Yes |
| Master Cylinder Port Quantity: |
4 |
| Pads Included: |
Yes |
| Part Type: |
4 Wheel Disc Brake Conversion Kit |
| Rear Rotor Diameter: |
11 IN |
| Shocks: |
Non Staggered |
| Spindles Included: |
Yes |
| Vehicle Ride Height: |
Stock Height |
| Disclaimer: |
The new spindles included in this kit will push the wheels outwards by 3/8 inch more than stock |