Drum brakes on a 1965-1968 Impala, 9"Booster, Performance fade on long stops and need constant adjustment. This Right Stuff kit converts the Impala, 9"Booster, Performance to power 4-wheel disc brakes. Why It's Worth It: 9" booster for power assist. Includes High Quality Brake Pads. Performance Series Conversion Kit Featuring Wilwood Calipers. Rear discs end drum fade and adjustment. Before You Order: Confirm your lug pattern and that your wheels clear the calipers before ordering. Check firewall and valve cover clearance for the 9" booster. The new spindles included in this kit will push the wheels outwards by 3/8 inch more than stock. Going to 4-wheel disc changes front/rear bias, so check your proportioning valve setup. Pre-bent TRS brake line kits are available separately to finish the conversion. Bleed the system and bed in the pads after installation.
Specifications:
| Booster Diaphragm Type: |
Single |
| Booster Housing Diameter: |
9 IN |
| Brake Activation: |
Power |
| Brake Booster Included: |
Yes |
| Caliper Piston Quantity: |
2 |
| E-Brake Caliper: |
No |
| E-Brake Cables Included: |
No |
| Fits Wheel Size: |
15"+ IN |
| Front Rotor Diameter: |
11 IN |
| Master Cylinder Bore Size: |
1 IN |
| Master Cylinder Included: |
Yes |
| Master Cylinder Port Quantity: |
2 |
| Pads Included: |
Yes |
| Part Type: |
4 Wheel Disc Brake Conversion Kit |
| Rear Rotor Diameter: |
11 IN |
| Shocks: |
Non Staggered |
| Spindles Included: |
No |
| Vehicle Ride Height: |
Stock Height |
| Disclaimer: |
The new spindles included in this kit will push the wheels outwards by 3/8 inch more than stock |